Industries

 

Applications

 

Polymer Is a “Blind” Product

Its tolerance can vary greatly between batch to batch and supplier to supplier. Today’s customers require accurate information allowing them to validate and adjust their process ensuring products they make meet or exceed their specifications.  Ensure you are receiving what you purchased before the material enters your process with the right polymer evaluation solution for your application. 

Laboratory | Quality Control Testing

Online Rheological Testing

Polymer Evaluation Ancillary Products

Polymer Evaluation Legacy Products

Shared Knowledge

Understanding the Shear Thinning Behavior of Thermoplastic Materials Using an Extrusion Plastometer (Melt Indexer)

In this blog our Rheological Scientist, Azadeh Farahanchi Ph.D. discusses how to understand plastic shear thinning behavior using a melt indexer

Learn More

How to Measure Polymer`s Apparent Melt Density using a Melt Indexer

Method A/B is a test that can be performed in a melt flow rate tester in order to calculate the value of the polymer`s melt density at a specific temperature

Learn More

Different Test Methods for Measuring Melt Flow Rate of Plastic Materials Using a Melt Indexer

This blog talks about the various methods (Method A and B) and their differences in measuring the melt flow rate of plastic material

Learn More

Measuring Die Swell Using a Capillary Rheometer

Die swell has been used as a qualitative measure of polymer melt elasticity for quality control purposes in plastics industry. Die swell also can be used for analysis of extrudate smoothness in an extrusion process.

Learn More

How Rheological Data from a Capillary Rheometer Can Help to Have a Better Metal Injection Molding (MIM) Process?

One of the key factors in any MIM process is the flow behavior of the feedstock during filling of of the mold. In order to have a defect free molding process (without jetting, short shot, sink mark, crack, etc.) with desired mechanical strength (tensile, flexural, failure stress, etc.) in the final products, understanding of the rheological properties of the binder and feedstock is necessary

Learn More

Measurements from Various Sensors in a Capillary Rheometer

Capillary rheometers are one of the most common types of analytical devices, used to analyze the flow properties of viscoelastic polymer materials under processing conditions. The Dynisco LCR7001 can utilize both load cell and pressure transducer simultaneously in order to produce information on both the force applied to the polymer sample and the resulting pressure at the die entrance.

Learn More

Correlation of ViscoIndicator Online Rheometer to a Laboratory Melt Flow Rate Tester

Online rheometers have been used increasingly in plastics processing and recycling industry to provide continuous data stream of rheological properties and real-time information on an extrusion process. This can beneficial for controlling of in-process product quality, reducing of waste stream, and increasing of process efficiency

Learn More

Capillary Dies in Capillary Rheometer

Gain an understanding about the selection of capillary rheometer dies that Dynisco produces for various applications.

Learn More

Laboratory Mixing Extruder as Spinning Tool to Fibrillate Droplet Phase of Polymer Blend Systems

Nowadays, composites are ubiquitous in many parts of modern societies such as constructions, textiles, nonwovens, and automobile industry. In composites, interface plays a pivotal role in final mechanical properties.

Learn More

The Importance of Melt Flow Measurement

Creating a flowing material can be measured in grams per ten minutes (per the ASTM D1238/ISO 1133) providing vital material properties.

Learn More

Detecting Polymers in Material Products

It can be very difficult, if not impossible, to achieve complete indentification of most polymer products. However, in most cases, this is usually not needed; what is needed is the separation, or identification, of numerous molding materials whose identity has been lost, or an indication of the type of material used to create a component.

Learn More

Have A Question? Ask a Dynisco expert for more information.

  • Dynisco

    38 Forge Parkway,
    Franklin MA 02038

    +1 508 541 9400  

  • Dynisco Europe GmbH

    Pfaffenstr. 21, 74078,
    Heilbronn, Germany

    +49 7131 297 0

  • Dynisco China

    Bldg. 7A, No. 568, Longpan Rd.
    Malu, Jiading, 201801, China

    +86 21 34074072-888

  • Dynisco-Viatran Instrument Sdn Bhd

    Lot 3615, Jalan SM 6/8
    32040 Seri Manjung, Perak, Malaysia

    +605 6884014

Dynisco - Polymer Evaluation
Polymer, Laboratory/Quality Control Testing, Online Rheological Testing, Polymer Evaluation Ancillary Products, right polymer evaluation solution, blind product
Polymer is a “blind” product its tolerance can vary greatly between batch to batch and supplier to supplier. Today’s customers require accurate information allowing them to validate and adjust their process ensuring products they make meet or exceed their specifications. Ensure you are receiving what you purchased before the material enters your process with the right polymer evaluation solution for your application.