
Industries
Applications
The Dynisco PolyClean system is a safer and faster way of cleaning capillary dies, breaker plates, and a variety of small tooling. Our line of Fluidized Temperature Bath’s (FTB) liquid-like properties provide fast heat transfer to immersed tooling for immediate heating and burning off tough-to- clean polymers.
Fluidized Temperature Bath’s don’t require consumables or chemicals to operate; just the proper ventilation and HEPA filtration system. They are safer than salt baths and provide better temperature stability and uniformity than burn-out ovens; and most importantly, are budget friendly. Please refer the before and after photos of a part encrusted with PP. The part was placed in a basket & immersed for 60 minutes in alumina oxide heated at 650°F. The part was then dusted off with shop air and remove any ash and it was delivered back to the customer is ‘like-new’ condition
BEFORE
AFTER IMMERSION FOR 60 MINUTES IN POLYCLEAN
Laboratory Mixing Extruder as Spinning Tool to Fibrillate Droplet Phase of Polymer Blend Systems
Correlation of Melt Viscosity of Polyethylene Terephthalate to Solution Intrinsic Viscosity
Characterizing Thermal Stability of Polymer Melts Using a Capillary Rheometer
38 Forge Parkway,
Franklin MA 02038
+1 508 541 9400
Pfaffenstr. 21, 74078,
Heilbronn, Germany
+49 7131 297 0
Lot 3615, Jalan SM 6/8
32040 Seri Manjung, Perak, Malaysia
+605 6884014