Cookie Consent

Cookies are used for statistical purposes and to improve the site.
Cookies will be used after you click "Accept" or if you continue using Dynisco.com
To find out more please review our Privacy Policy.

Accept

BP520 Press Release

May 7, 2018

Dynisco Releases Next Generation Burst Plug with Indication

 

FRANKLIN, MASSACHUSETTS – Dynisco expands their rupture disc offering with the reliable, secure pressure relief system known as the BP520.  The Dynisco Model BP520 burst plugs are custom assemblies with pop-top burst indication and are designed for reliable, emergency relief of excess pressure in a system.  The BP520 is being released at NPE 2018: The Plastics Show, the world’s number 1 trade fair for plastics, scheduled May 7 -11 in Orlando, Florida (Booth W4863).

 

The Dynisco Model BP520 are installed on barrel bodies with hex ends, where the hex OD (across flats) is larger than the burst plug body. The metal retainer strap is held in place by the hex and the metal 'T' shaped cap is fastened to the other end of the strip. A 2mm hold is drilled through the body and cap. A burst indicator wire is passed through the hole and when the disk ruptures, the T-cap 'pops open' shearing off the BI wire and indicating a burst to the control system.

 

“The BP520 is the ideal tool to have in place within your process as a failsafe redundancy when used in parallel with pressure sensor failure triggers,” said David Azevedo, Global Technical Support Manager. “If there is an issue of over pressurization in your process, this will trigger immediate notification that something has gone wrong and needs addressing”. 

 

Another added feature is that the BP520’s can easily be configured to directly communicate and trigger an alarm with existing instrumentation, such as a process indicator, by being programmed to alarm on sensor input signal break. Once the burst plug has ruptured, the pop top will break the wire causing the alarm to be triggered

 

Other BP520 features and benefits include:

  • Each welded assembly consists of a threaded tubular body with a rupture disk welded onto the process end
  • Welded one-piece assembly – no degradation of joint strength at elevated temperatures
  • Inconel rupture disk – stable through a wide range of temperatures
  • 100% leaked tested
  • 100% electronic thread verification

 

 

About Dynisco

Dynisco is the leading provider of accurate, robust and reliable measurement and control solutions for extrusion and other plastics processes where pressure and temperature are critical Dynisco leading-edge sensors, controls, and analytical equipment are built of the expertise of an experienced engineering staff and are supported globally through our technical experts backed by our world-class manufacturing locations in the United States, Malaysia, and China.  Dynisco also supports Europe and the Middle East through our sales, engineering and distribution center located in Heilbronn, Germany.  For more information, visit www.dynisco.com.

 

MEDIA CONTACT:

Catherine Lindquist, (508) 541-9512 or catherine.lindquist@dynisco.com

Bill Desrosiers, (508) 541-9459 or bill.desrosiers@dynisco.com

Back to News List

Have A Question? Ask a Dynisco expert for more information.

  • Dynisco

    38 Forge Parkway,
    Franklin MA 02038

    +1 508 541 9400  

  • Dynisco Europe GmbH

    Pfaffenstr. 21, 74078,
    Heilbronn, Germany

    +49 7131 297 0

  • Dynisco China

    Bldg. 7A, No. 568, Longpan Rd.
    Malu, Jiading, 201801, China

    +86 21 34074072-888

  • Dynisco-Viatran Instrument Sdn Bhd

    Lot 3615, Jalan SM 6/8
    32040 Seri Manjung, Perak, Malaysia

    +605 6884014

Dynisco - News
how to understand total cost of ownership, next generation plastics workforce, news, Dynisco, PlastIndia 2018
Find out about the latest Dynisco News from events, to articles in various publications